otherwise trading masthead

 

Google Custom Search

 

incense holders


silver goddess incense holder

A lovely holder for cone incense in the shape of a stylised goddess figure. Beautifully cast in heavy silver metal with spiral decoration to both sides.

The incense goes inside the pan at the top, and is covered by the perforated dome, which is seperate. If you remove the dome, this can also be used as a candle holder.

The holder (the goddess part) is 155mm (15.5cm or 6 inches) high. The whole assembly, when the top is added, is 230mm (23cm or 9 inches) high.

silver goddess incense or candle holder - £12.50 add to basket laughing buddha incense holder


laughing buddha incense holder

A nice, solidly made incense holder with a laughing buddha figure sitting on a pile of lucky coins. He's made of resin and painted red and gold, the colours of prosperity. A single incense stick will fit in a hole to the front of the holder.

The holder is 75mm (7.2cm or 3 inches) across and 60mm (6cm or 2 and 1/2 inches) high.

laughing buddha incense holder - £1.50 add to basket laughing buddha incense holder


sitting buddha incense holder

Made of cast resin and painted red and gold, this serene seated buddha figure faces a bowl which is made to hold up to four incense sticks.

The holder is 90mm (9cm or 3 and 1/2 inches) wide and 70mm (7cm or 2 and 3/4 inches) high.

sitting buddha incense holder - £1.20 add to basket sitting buddha incense holder


round wooden incense holder

A nicely made round wooden incense holder, hand-carved with a pattern of leaves and flowers. You can stand a single incense cone in the central metal recess, or you can place up to four sticks in the holes that surround it.

The holder is 100mm (10cm or 4 inches) in diameter.

round wooden incense holder - £1.80 add to basket round wooden incense holder


green man tree incense holder

A green man incense holder suitable for incense cones, made of durable resin and hand-painted. It consists of a base on which to stand your incense cone, and a cover (the trunk and face of the tree man) that fits over it, funelling the smoke out of the top.

The holder, including the base, is 120mm (4 and 3/4 inches) high.

green man tree incense holder - £6.90 add to basket green man tree incense holder


green man celtic style incense holder and ash catcher

A handsome incense holder that you can use for either cone incense (on the circular recess at the flat end) or stick incense (using the little hole within the mouth). This is a very sturdy holder made from cast resin, ivory-coloured with an antique patina.

It features a celtic style face whose beard resolves into a knotwork design that runs the length of the holder.

The holder is 240mm long and 50mm across (9 and a half inches by 2 inches).

green man celtic style incense holder - £4.95 add to basket green man incense holder


little tortoise incense holder

A cute little glazed ceramic tortoise with a hole to fit an incense stick.

We have these in either black or a light blue.

The tortoises are 50mm (5cm or 2 inches) long and 25mm (2.5cm or 1 inch) high.

little black tortoise incense holder - £1.60 add to basket little black tortoise incense holder

little blue tortoise incense holder - £1.60 add to basket little blue tortoise incense holder


medium gunmetal pentagram cauldron

Heavy cast metal cauldron in a natural gunmetal finish. You can use these for burning herbs or for incense. There is a pentacle motif in relief on each side of the body of the cauldron.

They are very solid and robust, and have a rigid silver metal handle. They stand on three legs, which makes them very stable.

The cauldrons are 120mm (12cm or 4 and 13/4 inches) tall and 130mm (13cm or 5 and 1/2 inches) across. That's the height of the actual cauldron, not the height if you lift up the handle and measure to the top of that.

medium gunmetal pentagram cauldron - £13.90 add to basket 12cm gunmetal pentagram cauldron


small gunmetal pentagram cauldron

Heavy cast metal cauldron in a natural gunmetal finish, in a traditional pot-bellied cauldron shape.

These are perfect for burning herbs or for incense. There is a pentacle motif in relief on each side of the body of the cauldron.

They are very solid and robust little cauldrons, and have a rigid silver metal handle. They stand on three legs, which makes them very stable.

The cauldrons are 110mm (11cm or 4 and 1/2 inches) tall and 95mm (9.5cm or 3 and 13/4 inches) across. The first measurement is the height of the actual cauldron, not the height if you lift up the handle and measure to the top of that.

small gunmetal pentagram cauldron - £12.00 add to basket small gunmetal pentagram cauldron


small gunmetal triple moon cauldron

Heavy cast metal cauldron in a natural gunmetal finish, in a traditional pot-bellied cauldron shape.

These are perfect for burning herbs or for incense. There is a triple moon motif in relief on each side of the body of the cauldron.

They are very solid and robust little cauldrons, and have a rigid silver metal handle. They stand on three legs, which makes them very stable.

The cauldrons are 110mm (11cm or 4 and 1/2 inches) tall and 95mm (9.5cm or 3 and 13/4 inches) across. The first measurement is the height of the actual cauldron, not the height if you lift up the handle and measure to the top of that.

small gunmetal triple moon cauldron - £12.00 add to basket small gunmetal triple moon cauldron


small black pentagram cauldron

Heavy cast metal cauldron in a black enamel finish, in a traditional pot-bellied cauldron shape.

These are perfect for burning herbs or for incense. There is a pentacle motif in relief on each side of the body of the cauldron.

They are very solid and robust little cauldrons, and have a rigid black metal handle. They stand on three legs, which makes them very stable.

The cauldrons are 110mm (11cm or 4 and 1/2 inches) tall and 100mm (10cm or 4 inches) across. The first measurement is the height of the actual cauldron, not the height if you lift up the handle and measure to the top of that.

small black pentagram cauldron - £12.00 add to basket small black pentagram cauldron


small black triple moon cauldron

Heavy cast metal cauldron in a black enamel finish, in a traditional pot-bellied cauldron shape.

These are perfect for burning herbs or for incense. There is a triple moon motif in relief on each side of the body of the cauldron.

They are very solid and robust little cauldrons, and have a rigid black metal handle. They stand on three legs, which makes them very stable.

The cauldrons are 110mm (11cm or 4 and 1/2 inches) tall and 100mm (10cm or 4 inches) across. The first measurement is the height of the actual cauldron, not the height if you lift up the handle and measure to the top of that.

small black triple moon cauldron - £12.00 add to basket small black triple moon cauldron


witch hat incense burner with owl

A black witches' hat with an owl perched on its brim makes a fun and unusual incense burner.

The hat lifts off a circular base on which there is a central raised disc where you put an incense cone. When lit, the smoke will then drift upwards, through a hole in the top of the hat. There's a hole in the back, too, so air is drawn inside and over the burning incense - you can see this if you click through to the enlarged pictures.

The burner is 120mm (12cm or 5 inches) tall and 110mm (11cm or 4 and 1/2 inches) across.

witches' hat incense burner with owl - £7.48 add to basket witches hat with owl incense burner


witch hat incense burner with cat

An incense burner in the shape of a black witches' hat with a cat perched on its brim.

The hat lifts off a circular base on which there is a central raised disc where you put an incense cone. When lit, the smoke will then drift upwards, through a hole in the top of the hat. There's a hole in the back, too, so air is drawn inside and over the burning incense - you can see this if you click through to the enlarged pictures.

The burner is 120mm (12cm or 5 inches) tall and 110mm (11cm or 4 and 1/2 inches) across.

witches' hat incense burner with cat - £7.48 add to basket witches hat with cat incense burner


copper bowl incense holder

A beautiful incense burner made from patinated copper with three brass feet and brass decorations, each with a central turquoise stone.

The bowl has a raised portion in the centre which has holes which will accommodate three incense sticks.

The bowl is 105mm (10.5cm or 4 and 1/4 inches) across and 45mm (4.5cm or 1 and 3/4 inches) high.

copper bowl incense holder - £4.65 add to basket copper bowl incense holder Sorry - out of stock


back to *incense main page....

 

uk postage information

international postage information

Convert our GBP prices into your own currency. This Assistant opens in a new window - make sure you are not blocking pop-ups or you will just get a funny boinging noise.

currency conversion information

lisa parker incense sticks
Have you seen our Lisa Parker spell incense sticks?

read recentr customer feedback

wellbeing information

n


paypal information

refund policy

otherwise trading on facebook

email us

 

payment methods

all text and images copyright Otherwise Trading 2005 - 2015

sitemap